How to Charge Your IGNITE Module

Both the i18 and i36 modules use a standard internal rechargeable LiPo battery, providing over 20 hours of operation per charge. Each module includes a USB Charge Cable for easy recharging.

Follow the steps below to charge your module’s battery:

Step 1: Remove the battery door from the back of the module.

Step 2: Disconnect the LiPo battery from the connector.

Step 3: Connect the USB Charge Cable to a power source.

You’ll see a red light at the USB end, indicating the charger is connected and has power.

Step 4: Connect the 3-pin connector on the battery to the charge cable.

A blinking green light at the USB end indicates the battery is charging.

Step 5: Remove the battery from the charger.

When the green light on the USB end of the charger turns solid, the battery is fully charged and can be disconnected.

Step 6: Reconnect the battery to the module and reinstall the battery door.

Need more help? Contact us, we're always happy to assist!